Two dental implants retaining a lower denture have made a huge impact for our edentulous patients in terms of confidence in a social setting and overall quality of life.

maxillary prosthesis

The McGill Consensus Statement from May of 2002 recommends a mandibular overdenture retained by two dental implants as the first choice standard of care for edentulous patients. The question remains: is it fair to assume that what has been successful and recommended treatment for the mandibular arch will work for the maxillary arch?

This patient presents for an evaluation with two dental implants placed in the anterior segment of the maxilla and mandible. She had been wearing upper and lower complete dentures that were made prior to the placement of the dental implants.

The patient was aware that additional dental implants in the maxilla would require augmentation/bone grafting and did not wish to proceed in that manner. While the lower dental implants can be placed parallel and perpendicular to the occlusal plane, the resorption patterns typically result in a less-than-ideal position for the maxillary dental implants (Figure 1). The impression technique requires attention to detail required of traditional complete dentures, making use of the attachments as supplemental retention (Figures 2 and 3).

dental implants fig2 3

Once the working cast is made, the anatomic determinants of tooth position are identified and verified with a trial in wax allowing for the custom abutment to be made within the confines of the prosthesis (Figures 4 and 5).

dental implants fig4 5

The ball-O-ring attachment allows for slight movement of the overdenture. It is self-cleansing and, to some extent, does not require parallel placement of the dental implants (Figure 6).

dental implants fig6

The design of the definitive prosthesis includes full coverage of the palate in Vitallium to provide retention and stiffness (Figure 7).

dental implants fig7

The alloy limits the torsional forces (as compared to acrylic only) applied to the dental implants during function as well as during insertion and removal.

A discussion with the patient regarding the compromised nature of the design where the forces involved with normal function may result in the breakdown of the supporting structures of the maxillary dental implants and associated components at some point in the future. This means that the attachments would likely be changed in shorter intervals and the maintenance involved may require either a reline or a remake of the prostheses and/or abutments in order to optimize the distribution of forces to the dental implants (Figure 8).

dental implants fig8

Two implants in the maxilla appear to be a dental treatment alternative with increased maintenance with a few more steps in the treatment sequence for our edentulous patients. The favorable dental treatment as described by Eckert (2004) and others (four to six dental implants in the maxilla) may require extensive augmentation of the supporting structures. Many patients may not be able to proceed with an ideal plan to due to concerns related to overall health and healing capacity or simply financial resources.

Douglas G. Benting, DDS, MS, FACP, Spear Visiting Faculty and Contributing Author. www.drbenting.com

References

1. The McGill Consensus Statement on Overdentures. May 2002. Symposium at McGill University, Montreal Quebec, with 15 scientists and expert clinicians gathered issuing a summary statement that based on the current evidence (a compilation of randomized controlled trials) advising “Mandibular 2-Implant Overdentures as the First Choice Standard of Care for Edentulous Patients”.

2. Eckert, SE & Carr, AB. Implant retained maxillary overdentures. Dental Clinics of North America 2004; 48:585-601. The authors from Mayo Clinic recommend placement of 6 dental implants in the maxilla for overdenture prostheses in order to guard against dramatic changes in prosthesis design should an implant fail to integrate.



Comments

Commenter's Profile Image Mark Venditti
August 4th, 2014
Interesting and helpful. Thank-you.
Commenter's Profile Image Mark Venditti
August 4th, 2014
Interesting and helpful. Thank-you. Mark
Commenter's Profile Image Sharon Goodwin
August 5th, 2014
Nice case! Thank you for sharing with us! how do you make a separate tissue level impression and take a fixture level impression separately incorporating it into one cast>? how much space as a minimum do you allow from the soft tissue to the opposing occlusal plane for the O-ring attachment and the acrylic of the denture? Thank you!
Commenter's Profile Image Doug Benting
August 7th, 2014
Fun case, great patient. The impression was a fixture level impression only using the open tray pictured in figure 3. The labial inclination of the dental implants dictated the open tray, but also allowed for the impression of the soft tissue. I did take some liberty in terms of "re-shaping" the soft tissue to allow for a more palatally positioned abutment. As far as space between opposing occlusal plane and O-ring attachment, I am looking for 2.0mm of acrylic to cover the metal cap of the O-ring. In this situation, the metal framework was designed with a mesio-distal "strut" over the cap housing the O-ring to help support the area so that the O-Ring cap couldn't "punch" through the acrylic. Thank you for the questions - I am always interested in your thoughts.